Tracking Apstar 7 C Band Dish Telvis

Introduction

Satellite television has revolutionized the way we consume entertainment and information. One of the popular satellites used for broadcasting is the Apstar 7 C Band Dish Telvis. In this article, we will explore how to track and set up the Apstar 7 C Band Dish Telvis for optimal reception and viewing experience.

Understanding Apstar 7

Apstar 7 is a geostationary communication satellite that provides broadcasting and communication services across the Asia-Pacific region. It operates on the C Band frequency, which offers better resistance to weather conditions such as rain and provides a stable signal for high-quality television reception.

Choosing the Right Dish

Before setting up your Apstar 7 C Band Dish Telvis, it is crucial to select the right dish size. The dish size depends on your location and the strength of the satellite signal in that area. Generally, a larger dish size will provide better reception, especially in areas with weaker signals.

Aligning the Dish

Aligning the dish correctly is essential to receive a strong signal from Apstar 7. Follow these steps to align your dish:

1. Find the azimuth and elevation angles for your location using a satellite dish pointer tool or an online satellite dish alignment calculator.
2. Mount the dish securely on a pole or wall, ensuring it has a clear line of sight to the southern sky.
3. Use a compass to find the correct azimuth angle and adjust the dish accordingly.
4. Set the elevation angle according to the calculated value.
5. Tighten all the bolts and screws to secure the dish in its position.

Connecting the Receiver

After aligning the dish, it’s time to connect the receiver to your television. Follow these steps:

1. Connect the coaxial cable from the LNB (Low-Noise Block downconverter) on the dish to the “LNB IN” port on the receiver.
2. Connect an HDMI or RCA cable from the receiver to the corresponding input on your television.
3. Plug in the power cord of the receiver and turn it on.

Scanning for Channels

Once your receiver is connected, you need to scan for available channels. Here’s how:

1. Access the receiver’s menu using the remote control.
2. Navigate to the “Settings” or “Installation” section.
3. Select “Scan” or “Auto-tune” to start scanning for channels.
4. Wait for the receiver to complete the scanning process.
5. After scanning, you should see a list of available channels on your television screen.

Optimizing Signal Quality

To achieve the best signal quality for Apstar 7, consider the following tips:

• Ensure there are no obstacles blocking the dish’s line of sight, such as trees or buildings.
• Regularly check the dish alignment and make adjustments if necessary.
• Use high-quality coaxial cables to minimize signal loss.
• Install a satellite signal amplifier if you have long cable runs or multiple connections.

Conclusion

TraCking and setting up the Apstar 7 C Band Dish Telvis is an excellent way to enjoy a wide range of satellite television channels. By following the steps outlined in this article, you can optimize your dish’s reception and ensure a high-quality viewing experience. Remember to regularly maintain and check the alignment of your dish for consistent signal strength. Happy satellite TV viewing!